Danlers Microwave Surface IP67 6 Amp 2 Channel - MW6A2CIP67

IP67 rated Microwave presence detection switch - 2 channel

Ideal for outdoor or indoor use the MW6A2C IP67 microwave presence detectors can be wall or ceiling mounted and are designed for the automatic switching of lighting, heating and air conditioning loads. The sensor detects movement, within its range of detection, by emitting low power microwave signals and measuring the reflections as the signal reflects off moving objects such as people moving through a room.

When movement is detected the load switches ON. If no more movement is detected within a certain time, then the MW6A2C IP67 will switch the load OFF. The time can be set via the internal dip switches. Two channels for switching two separate circuits. Can also be wired to control two volt free circuits. This surface-mounted IP67 rated Microwave presence detection switch is ideal for solid walls or ceilings.

Features:

• Time lag range: 5sec (walk test), 30 sec, 1 min, 5 min, 20 min, 30 min
• Detection range: 12m x 6m maximum
• Detection options: 10/ 30/ 50/ 75/ 100%
• Detection angles: 30 to 150 degrees according to detection %
• Mounting height: 6m maximum
• IP rating: IP67
• Dimensions: 110 x 110 x 65mm

Free Delivery on All Orders Over £50.

This Excludes Delivery to the Scottish Highlands, Offshore Islands and Northern Ireland.

For more information, please see our Delivery details.