Danlers Microwave Flush Mounted Detector - MWCEFL

MWCEFL microwave presence detector is designed for the automatic switching of lighting, heating and air conditioning loads. These neat and unobtrusive models are ideal for flush mounting through suspended or plasterboard ceilings.

The sensor detects movement within its range of detection by emitting low power microwave signals and measuring the reflections as the signal reflects off moving objects such as people moving through a room. When movement is detected, the load switches on. If no more movement is detected within a certain time, the MWCEFL will switch the load off.

This time lag (hold time) can also be set via the rotary switch. Upon detecting movement, if the ambient light is dark enough, MWCEFL will turn the load on. The ambient threshold can also be set by setting the rotary dial to the appropriate preset. If no more movement is detected within a pre-selected time, then MWCEFL will turn the load off.

Features:

• Opearting voltage: 220-240V 50Hz
• Detection area: 50/ 75/ 100 %
• Time lag range: 5 sec, 30 sec, 1 min, 5 min, 10 min, 30 min
• Photocell range: 2 lux - 50 lux (at the photocell) and inactive
• Sensor type: microwave motion detection
• Detection angle: 30 - 150 degree
• Mounting height: up to 6m maximum
• IP rating: IP20
• Operating temperature: -20 to 60 degrees
• Dimensions: 85 x 85 x 65mm

Free Delivery on All Orders Over £50.

This Excludes Delivery to the Scottish Highlands, Offshore Islands and Northern Ireland.

For more information, please see our Delivery details.